BMW Motorrad K 1600GTL, Rider'S Manual, Page: 177 / 315

ATTENTION
Incorrect gap between
sensor ring and wheel speed
sensor due to misaligned
threaded bush in front
suspension
Damage to wheel speed sensor.
ABS malfunction
Left clamp locates the
threaded bush; do not loosen
or remove this clamp.
Remove right-hand axle clamp-
ing screw
2 .
Remove quick-release axle 3 ,
while supporting the wheel.
Roll the front wheel forward to
remove.
Installing front wheel
WARNING
Use of a non-standard wheel
Malfunctions in operation of ABS
and DTC
See the information on the ef-
fect of wheel size on the ABS
and DTC systems at the start
of this chapter.
ATTENTION
Tightening threaded fasten-
ers to incorrect tightening
torque
Damage, or threaded fasteners
work loose
Always have the security of
the fasteners checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
ATTENTION
Front wheel installed wrong
way round
Risk of accident
Note direction-of-rotation ar-
rows on tyre or rim.
Roll the front wheel into posi-
tion between the front forks.
Raise the front wheel, insert
quick-release axle
3 and
tighten to specified torque.
9
175
z Maintenance