BMW Motorrad K 1600 GT, Rider'S Manual

Page: 96 / 221

Do not allow the engine to idle
unnecessarily.
Ride away immediately after
starting the engine.
Manipulation
ATTENTION
Tampering with the motor-
cycle (e.g. engine manage-
ment ECU, throttle valves,
clutch)
Damage to the affected parts,
failure of safety-relevant func-
tions, voiding of warranty
Do not tamper with the vehicle
in any way that could result in
tuned performance.
Comply with checklist
At regular intervals, use the
checklist below to check your
motorcycle.
Requirement
Always before riding off:
Check operation of the brake
system.
Check operation of the lights
and signalling equipment.
Checking clutch function
(
127).
Check the tyre tread depth
(
129).
Check that cases and luggage
are securely held in place.
Requirement
Every 3rd refuelling stop:
Checking engine oil level
(
122).
Checking front brake pad thick-
ness (
124).
Check rear brake pad thickness
(
124).
Checking brake-fluid level, front
brakes (
125).
Check the brake-fluid level, rear
brakes (
126).
Check coolant level ( 127).
Starting
Start engine
Switch on the ignition.
Pre-Ride-Check is performed.
(
95)
Running ABS self-diagnosis.
(
96)
DTC self-diagnosis is per-
formed. (
96)
Select neutral or, if a gear is
engaged, pull the clutch lever.
NOTICE
You cannot start the motorcycle
with the side stand extended and
a gear engaged. The engine will
switch itself off if you start it with
the gearbox in neutral and then
engage a gear before retracting
the side stand.
6
94
z Riding