BMW Motorrad K 1600 B Grand America, Rider'S Manual

Page: 123 / 304

A dot to the left of the
Bluetooth symbol indic-
ates that the audio system is
connected to the rider's helmet
(
Helmet1
). A dot to the right of
the Bluetooth symbol indicates
a connection to the passenger's
helmet (
Helmet2
). A flashing
dot indicates that the audio sys-
tem is searching for the corres-
ponding helmet.
If pairing information for a com-
munication system is saved in
the audio system's memory,
the audio system automatically
searches for this system.
If connection to a BMW Motorrad
communication system is not
established despite the fact that
the system is switched on:
Briefly press the on/off button
of the communication system
twice in quick succession.
Pairing
Two Bluetooth devices have to
recognise each other before they
can communicate. This process
of mutual recognition is known
as pairing. When two devices
have paired they remember each
other, so the pairing process is
conducted only once, on initial
contact.
Two BMW communication sys-
tems with Bluetooth standard 2.0
are required if both rider's helmet
and passenger's helmet are to
be paired to the audio system. If
either of the two BMW systems
is using Bluetooth standard 1.2,
only one helmet can be paired.
Refer to the operating instruc-
tions of your communication sys-
tem for information on Bluetooth
standards.
During the pairing process, the
audio system searches for other
Bluetooth-compatible devices
within its reception range. The
conditions that have to be satis-
fied before the audio system can
recognise another device are as
follows:
The device's Bluetooth func-
tion must be active
The device must be "visible" to
others
The device must support the
A2DP profile
Other Bluetooth-compatible
devices must be OFF (e.g.
mobile phones and navigation
systems).
Please consult the operating in-
structions for your communica-
tion system.
5
121
z Audio system