BMW Motorrad G 310 R, Rider'S Manual

Page: 78 / 166

72 MAINTENANCE
GENERAL NOTES
The 'Maintenance' chapter
describes work involving the
checking and replacement
of wear parts that can be
performed with a minimum of
effort.
If special tightening torques are
to be taken into account for in-
stallation, these are listed. An
overview of all required tight-
ening torques is contained in
the chapter "Technical data".
Further information about
maintenance and repair
tasks can be obtained on
DVD through your authorized
BMW Motorrad retailer.
Special tools and thorough
specialized knowledge are
required to carry out some of
the work. If you are in doubt,
consult a specialist workshop,
preferably your authorized
BMW Motorrad retailer.
ONBOARD VEHICLE TOOL
KIT
1 Open-ended wrench
Wrench size: 12/13 mm
Adjusting chain tension
( 91).
2 Open-ended wrench
Wrench size: 10/16 mm
Adjusting mirror arm
( 44).
Removing the battery
( 97).
3 Hook wrench
Adjusting the spring
preload at the rear
wheel ( 45).
4 Box wrench
Wrench size: 27 mm
Removing the rear
wheel ( 88).
Adjusting chain tension
( 91).
5 Extension for hook
wrench and ring wrench
6 Reversible screwdriver
insert with cross heads
7 Screwdriver handle
8 Allen screw
5 mm