BMW Motorrad F 900 XR Rider'S Manual Download

Page: 75 / 261

Display while adjusting
(Speed Limit info active)

The symbol

for the cruise con-

trol is displayed in the Pure Ride
view and in the upper status line.

Switch on cruise-control
system

Slide switch

to the right.

Button

can be operated.

Store speed

Short-press button

forward.

Adjustment range of the
cruise control

19...130 mph (30...210 km/h)

Cruise control indicator light
lights up.

The motorcycle maintains your
current cruising speed and the
setting is saved.

Accelerating

Short-press button

forward.

The speed is increased by 0.6-
1.2 mph (1-2 km⁄h) each time
the button is pressed.

Operation

Summary of Contents for F 900 XR






































































































































































































































































Search results

Summary of Contents for F 900 XR

Reviews:

Related manuals for F 900 XR

Brands by name

Popular brands

BMW Motorrad F 900 XR, Rider'S Manual

Search results

Summary of Contents for F 900 XR

Reviews:

Related manuals for F 900 XR

Brands by name

Popular brands