BMW Motorrad F 900 XR Rider'S Manual Download

Page: 67 / 261

Press and hold button

until

the ASC/DTC indicator and
warning light changes its
display behavior.

Immediately after pressing but-
ton

, the ASC/DTC system sta-

tus

is displayed.

ASC/DTC indicator and
warning light lights up.

Possible ASC system status
OFF! is displayed.

Release button

after

switchover of the ASC/DTC
system status.

ASC/DTC indicator and
warning light remains illu-

minated.

The new ASC/DTC system sta-
tus

OFF!

is displayed briefly.

The ASC/DTC function is
switched off.

Switching on the ASC/
DTC function

Press and hold button

until

the ASC/DTC indicator and
warning light changes its
display behavior.

Immediately after pressing but-
ton

, the ASC/DTC system sta-

tus

OFF!

is displayed.

ASC/DTC indicator and
warning light no longer

lights up and begins to flash if
self-diagnosis has not been com-
pleted.

Possible ASC system status ON
is displayed.

Release button

after

changeover of the status.

ASC/DTC indicator and
warning light remains off

or continues to flash.

The new ASC/DTC system sta-
tus

is displayed briefly.

The ASC/DTC function is
switched on.
If the coding plug is not in-
stalled, the ignition can also be

Operation

Summary of Contents for F 900 XR






































































































































































































































































Search results

Summary of Contents for F 900 XR

Reviews:

Related manuals for F 900 XR

Brands by name

Popular brands

BMW Motorrad F 900 XR, Rider'S Manual

Search results

Summary of Contents for F 900 XR

Reviews:

Related manuals for F 900 XR

Brands by name

Popular brands