BMW Motorrad C 400GT, Rider'S Manual

Page: 38 / 248

ABS self-diagnosis not
completed
ABS indicator and warning
light flashes.
Possible cause:
Self-diagnosis did not complete,
so the ABS function is not avail-
able. The Scooter must be rid-
den at a speed of at least 5 km/h
in order for ABS self-diagnosis to
complete.
Pull away slowly. Bear in mind
that the ABS function is not
available until self-diagnosis has
completed.
ABS fault
ABS indicator and warning
light shows.
Possible cause:
The ABS control unit has detec-
ted a fault. The ABS function is
not available.
Further riding is possible, al-
though allowance must be
made for the lack of the ABS
function. Take note of the
more detailed information on
situations that can lead to an
ABS fault (
137).
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
Retailer.
ASC intervention
ASC indicator and warning
light flashing quickly.
The ASC has detected a degree
of instability at the rear wheel
and has intervened to reduce
torque. The ASC warning light
flashes for longer than the ASC
intervention lasts. This affords
the rider visual feedback on con-
trol intervention even after the
critical situation has been dealt
with.
ASC self-diagnosis not
completed
ASC indicator and warning
light flashing slowly.
Possible cause:
ASC self-diagnosis not
completed
The Scooter has to reach a
defined minimum speed with
the engine running for the
wheel speed sensors to be
checked:
min 5 km/h
Pull away slowly. Bear in mind
that the ASC is not available
until self-diagnosis has com-
pleted.
ASC switched off
ASC indicator and warning
light shows.
3
36
z Status indicators