BMR PLA44 User And Service Manual Download Page 17

Page: 17 / 18

Development and production of systems for measurement and control

7. Firmware update

Device firmware can be updated when the new firmware is released. Visit the

for to verify

availability of new firmware. Firmware file is prepared as an exe file that is directly run on Windows PC.

For the successful firmware update connect the PLA44 via Ethernet to PC where the Update software will run. Enter
the IP address of the PLA44 and user name and password. Pressing button Connect will verify accessibility of PLA44

and prepare connection for firmware update start.

Important

While firmware is update device should be on the stable power supply and Ethernet connection should not be removed.

BMR

trading

Horní lán 17
779 00 Olomouc

Czech Republic

Tel: +420 778 066 566

[email protected]

www.bmr-trading.com

Summary of Contents for PLA44



















Search results

Summary of Contents for PLA44

Reviews:

Related manuals for PLA44

Brands by name

Popular brands

BMR PLA44, User And Service Manual

Search results

Summary of Contents for PLA44

Reviews:

Related manuals for PLA44

Brands by name

Popular brands