manualshive.com logo in svg

BMPRO THOR RVMASTER, Owner'S Manual

Share
Download
BMPRO THOR RVMASTER Owner'S Manual Download Page 46

46

PAIRING WITH THE NODE

I tried pairing my smartphone to the Node but it didn’t connect?

If pairing failed try the following before attempting to pair your smartphone again:

1. 

Toggle the smartphone’s Bluetooth off and on.

2. 

Restart the RVMaster App.

3. 

Cycle power to the Node off and on by disconnecting RV shore power or if 
available in your RV, cycling the battery isolation switch off and on.

If the above does not solve the problem, go to the RVMaster App General Settings 
and unpair your smartphone. Then follow the instructions in

 Clearing the 

Node

 to clear the Node memory of any previously connected devices. Pair your 

smartphone again.

I tried pairing my smartphone to the Node but the Controller displays --?

When pairing to the Node if the Controller displays --, the Node is already paired 
to four devices and cannot support anymore devices.
Follow the instructions in 

Clearing the Node

, then pair your smartphone. Don’t 

forget to also pair the Controller again.

WARNING

If you clear the Node remember to pair with the Controller again.

Summary of Contents for THOR RVMASTER





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands