BMPRO SwayControl, Owner'S Manual, Page: 9 / 20

9
Wiring Instructions
SWAYCONTROL WIRING HARNESS
The SwayControl wire harness has five wires requiring electrical connection (table 1)
and one cable for the status LED light.
When making connections to the caravan/trailer’s wiring harness, the desired
termination is a solder joint. If the connection is not soldered, use the appropriate
size and type of “crimp-type” weather sealed heat-shrink connectors, using the
manufacturer’s recommended crimping tools in accordance with their crimping
instructions.
WARNING
Taking shortcuts when connecting any wires on your trailer only increases the
likelihood that some part of your electrical system will fail.
Make sure connections are durable and sealed against exposure to weather and
corrosive elements. One loose connection can disable your entire trailer brake
system.
WARNING
Failure to use the correct wire may result in poor braking performance or brake
failure. Incorrect wire size may also result in significant damage to your trailer or its
components.
Undersized wire will prevent electrical circuit protection devices such as fuses or
circuit breakers from functioning properly.