BMC G3 B20A, User Manual, Page: 27 / 61

BPAP System User Manual
24 / 57
Fig. 13-3
(2) Open the cap, and fill the water chamber with approximately 360 ml of water, as shown
in Fig. 13-4. Make sure that the water does not exceed the maximum water level line.
Fig. 13-4
WARNING!
• Change water before every use and do not surpass the maximum water level line.
CAUTIONS!
• Empty the water chamber when the heated humidifier is not in use.
• Distilled water is recommended.
IMPORTANT TIP!
• It is not necessary to remove the water chamber from the device. The users can open the
cap of the water chamber with it being attatched to the divice to fill it with water.
13.1.3 Putting the Water Chamber back
Close the cap when the water chamber is filled with water, as shown in Fig. 13-5, and return
it back to the device,
as shown in Fig. 13-6 .
Fig. 13-5