
BPAP System User Manual
23 / 57
12.7 Turning the Device Off
Take off the mask and headgear, press
the
Start / Stop Button
, and the device
will stop delivering air. Disconnect the power cord from the power outlet to turn off the
device.
CAUTION!
• Do not position the device where it is difficult to disconnect the device.
13. Heated Humidifier
Humidifiers can be obtained from your home care provider. Humidifiers can reduce nasal
dryness and irritation by adding moisture (and heat if applicable) to the airflow.
13.1 Filling the Water Chamber
13.1.1 Removing the Water Chamber
Press down the water chamber, and then remove it, as shown in Fig. 13-1.
Fig. 13-1
WARNING!
•
Turn the device off and allow the heating plate and water to cool for approximately 15
minutes.
13.1.2 Filling
the Water Chamber
(1) Open the cap,
as shown in Fig. 13-2, and fill the water chamber with approximately 360
ml of water, as shown in Fig. 13-3. Make sure that the water does not exceed the maximum
water level line.
Fig. 13-2
Summary of Contents for G3 B20A
Page 61: ...391170 ...