BM2 BIEMMEDUE GEMINI PLUS, Instructions For Use And Maintenance Manual

Page: 28 / 52

Use and Maintenance
5
GENERAL INFORMATION
■ Packaging dimensions ■ Symbols shown on the machine and/or
Width ....................................... mm 405
on the accessories
Length...................................... mm 535
The following symbols are installed on the
Height ...................................... mm 525
■ Weights
Weight with accessories ............ kg 21,0
Weight without accessories ....... kg 15,5
■ Identification
The data plate of the machine with CE compliance
mark, is placed on the rear part of the steam
generator.
machine:
When asking for information and/or technical
assistance, always specify the serial number
stamped on the plate.
(*) The indicator light comes on and a warning
sound is produced: a blinking light indicates
there is no water in the clean water tank,
whereas a continuous sound indicates there
is no detergent in the corresponding tan
Symbol Meaning
Low fluid level in the tank (*).
This symbol indicates that there is
no water in the boiler. If the indicator
light bearing this symbol comes
on, read “Possible problems,
causes and solutions”.
Steam symbol.
Vacuum symbol.
Steam regulation (on
iron/optional)
Iron symbol ( optional)
Risks of burns and scalds.