KAPTOR
MINI
–
User Manual
–
V0.1 - pg.71
In this way a correction factor will be calculated and applied so that the instrument is able to read a correct
voltage value.
Calibration ensures that any alarm set to low battery voltage will trigger correctly.
12.11.6
Factory settings
By resetting to factory settings, it is possible to restore the instrument to the
initial settings.
In normal conditions, setting reset has to be performed in case of firmware
update but it is necessary in some cases of version change to obtain a
different functioning of the instrument: for example in the transition from the Flow version (for the
management of TTFM sensors and Doppler) to the 485 standard version for the management of sensors
with modbus RTU protocol and vice versa. Details on the need for reset are provided together with the
release of the firmware versions.
To start the restore, EasySetup asks for a code to ensure that the restore is not performed
accidentally. When requested, enter the code
1234
.
By restoring the factory settings, all settings and data stored in the instrument's memory are
deleted. Deleted data and settings cannot be restored.