KAPTOR
MINI
–
User Manual
–
V0.1 - pg.37
11.4.4
Codes and Passwords
Codes and password used in EasySetup, are necessary to access some definite functions. The table below
is a resume, detailed functions are explained in their referring paragraphs.
Wi-Fi Connection to the device
SSID (network name): written on the external label
Password (default):
users password
Delete device memory
1234
Reset to factory settings
1234
11.5
Wi-Fi Connection to the device
The connection to the instrument takes place via a Wi-Fi network with the name (SSID) MKP_xxxxxxxxxxxx,
where instead of the x there will be the instrument
’s ID
shown on a special label stick outside the case.
Using the appropriate connection button on the status bar, the App searches for available Wi-Fi networks
and shows only those whose name begins with MKP in order to exclude those that are certainly not
generated by
KAPTOR
MINI
.
Among those present, the one of interest must be selected.
If your device is not listed among the available connections, pls check its status LEDs to check
if it is ready for connection.
If the list of available connections is empty, check if the tablet’s localization is active.
Android
TM
requests these services to be active in order to generate a list of available Wi-Fi
networks.
It is possible to connect via Wi-Fi to the device by using the Wi-Fi manager of Android
TM
.
Default password is
users password
.
For an optimal Wi-Fi connection, keep the table at leats 50 cm from
KAPTOR
MINI
.
For a better connection, it could be asked to disable mobile data.
In fact, on many mobile phones/tablets, Android favors the connection that can guarantee
access to the Internet. In these cases the connection with the instrument would be ignored.
In normal conditions the App is able to connect without a new password. The first attempt is made with
the default password or with a previously stored password. In case the instrument's network password
has been changed with a different tablet, then it may be necessary to manually enter the updated one.