BLUM RC66, Installation Instructions Manual, Page: 12 / 20

Mounting
RC66 | 08-2021
12
Blum-Novotest GmbH
4. Mounting
4.1 Selecting the installation position

The installation position has no effect on other machines – see 3.5 Area of work .

The measuring device is reached – see 3.5 Area of work .

The receiver is optimally protected against coolant and flying chips.

Test the desired installation position before installation.

Use the drilling template included.
4.2 Mounting variants
4.2.1 Horizontally facing cable
Fig. 4-1 RC66 – Installation with horizontally facing cable.
4.2.2 Cable (outgoing) downward
Fig. 4-2 RC66 – Installation with cable facing downward.
1 2 3
1 2
4 5
2,5 mm (M3) – 1,3 N·m max.
3 mm (M4) – 3,0 N·m max.
(1) Seal insert
(2) O-ring 40× 2(NBR 70) (3) Machine wall
(4) 4× holding screws M3×10 (ISO 4762)
(5) 4× holding screws M4×10 (ISO 4762)
1 2
4
3
4
2,5 mm (M3) – 1,3 N·m max.
3 mm (M4) – 3,0 N·m max.
(1) 4× holding screws M3×10 (ISO 4762)
(2) 4× holding screws M4×10 (ISO 4762) (3) BLUM Heavy Duty Kit – see 6. Order numbers
(4) Machine wall