81
V1.1
SmartBus P900-TI6N USER MANUAL
L
C
D
6. Press the
[F]
key to temporary erase setting or wrong keyed in numbers.
7.
Button “▲” on the keypad is representing a “PAUSE” key of 3 seconds duration.
8.
Button “
▼
” on the keypad is representing a “
” key.
9. Press
[#]
key to confirm the setting.
10. Press
[
]
to exit user programming mode.
11. If programmed so, system will call out to user telephone to report any intrusion.
12. If the system fails to contact the preprogrammed personal telephone number 1, system
will contact
PERSONAL TELEPHONE NUMBER 2
as a back up.
**
Press
[▼]
to scroll down to
User Tel No2
and press
[#].
Press
[▼]
to scroll down to
User Tel No3
and press
[#].
Press
[▼]
to scroll down to
User Tel No4
and press
[#].
1. Ensure that the system is in USER PROGRAMMING mode (page 71
Section 9.19.1
).
2.
Press [▼] to scroll down to
Tel Nos
.
3. Press
[#]
to access
Tel No.
menu.
4. Press
[#]
to select
User Tel No1*
.
5. Press the
[F]
key to erase and the setting will be emptied.
6. Press
[#]
key to erase previous personal telephone number setting.
7. Press
[
]
to exit user programming mode.
9.19.16 TO ERASE PERSONAL TELEPHONE NUMBER 1/2/3/4
