68
V1.1
SmartBus P900-TI6N USER MANUAL
L
C
D
2. Press and hold down key
[4]
for 2 seconds.
3. P1 and P2 options will be displayed.
4. Press key
[1]
to arm Partition 1 or press key
[2]
to arm Partition 2 followed by
[#]
key.
5. The
icon will be displayed if Partition 1 is armed.
6. The
icon will be displayed if Partition 2 is armed.
7. An
EXIT
delay countdown timer will be shown at the top right temporarily replace the
clock and the keypad audible indicator will sound on and off for the duration of the
EXIT
delay.
8. Any bypassed zones will be shown by the flashing zone underline.
9. User will be given an
ENTRY
delay time to disarm the system when enter the protected
premises via
ENTRY/EXIT
zone.
[0] + [1 or 2] + [#]
(Press and hold down for 2 seconds)
1. This arming mode is ideal for long away occasion (holiday).
2. In this mode, the system will be
AWAY
armed. Home Automation points will be random
ON/OFF every hour to simulate occupancy from 7pm to 1am.
3. Ensure that all zone indicators are distinguished; if not, check that all protected premises
are closed.
4. Hold down key
[0]
for 2 seconds.
5. P1 and P2 options will be displayed.
6. Press key
[1]
to arm Partition 1 or press key
[2]
to arm Partition 2 followed by
[#]
key.
7. The
icon will be displayed if Partition 1 is armed.
9.16.7 PARTITION HOLIDAY ARMING
