BLUGUARD SmartBus P900-TI6N User Manual Download Page 60

Page: 60 / 87

V1.1

SmartBus P900-TI6N USER MANUAL

C
D

3. The viewer will displayed:



Date



Time



Event Occurred

Press [▼] to view the 2

latest event and continue to press

[▼] for next event.

5. Press

[

]

to exit event viewer.

FIRE MODE

[F]

(Press and hold down for 2 seconds)

1. This key will activate the FIRE ALARM condition when it is held down for 2 seconds.

2. The FIRE ALARM condition can also be triggered by an installed smoke detector, which

is set as fire zone.

3. The siren will sound and the FIRE REPORTING CODE will be transmitted to the central

monitoring station.

4. To silence the siren, enter a 4-digit user code followed by

[#]

key.

PANIC MODE

[MODE] + [8] + [#]

1. The PANIC ALARM condition will be activated when press

[MODE] + [8] + [#].

2. The PANIC ALARM condition can also be activated by any FIXED or REMOTE PANIC

button that has been installed.

3. If the panic button is set as silent zone, then the PANIC REPORTING CODE

will be

transmitted to the central monitoring station without the siren sounding. Ensure that your

installer has enabled this function if it is required.

4. To silence the siren, enter a valid 4-digit user code followed by

[#]

key. If the siren is not

cancelled, it will stop automatically after the SIREN TIME OUT period.

5. Press this mode only in an emergency situation that requires response by emergency

personnel.

9.14 EMERGENCY SITUATION

Indicate the status of the zones

Summary of Contents for SmartBus P900-TI6N
























































































Search results

Summary of Contents for SmartBus P900-TI6N

Reviews:

Related manuals for SmartBus P900-TI6N

Brands by name

Popular brands

BLUGUARD SmartBus P900-TI6N, User Manual

Search results

Summary of Contents for SmartBus P900-TI6N

Reviews:

Related manuals for SmartBus P900-TI6N

Brands by name

Popular brands