58
V1.1
SmartBus P900-TI6N USER MANUAL
L
C
D
2. The
icon will extinguish once the user enters
VIEW ALARM MEMORY
mode.
3. Hold down key
[8]
for 2 seconds.
4. The
screen will show “
Alarm Memory
” and keypad audible indicator will sound 2 beeps.
5. One or more
ZONE
numbers will be displayed to indicate the zones that cause the most
recent alarm.
6. Press
[#]
key to exit and keypad audible indicator will sound 2 beeps.
The chime mode allows user to monitor nominated zones while the system is disarmed. The
audible indicator will sound briefly when the nominated zone is violated
– the siren will NOT
sound. If you wish to know there is someone enters or exits the front door, the keypad will beep
once when the door is opened provided the zone is a chime zone.
[9]
+ [ZONE NUMBERS] + [#]
(Press and hold down for 2 seconds) (1 to 16)
1. Hold down key
[9]
for 2 seconds.
2. The
screen will show “
Chime Info
” and keypad audible indicator will sound 2 beeps.
3. Press the key corresponding to the zone that you wish to be the chime zone.
4.
To enter zone number more than 9, press button [F] to represent the ten’s digit.
E.g. To enter zone number 12, press [F] + [2], zone number 16 press [F] + [6].
5. Press
[#]
key to exit the chime mode and keypad audible indicator will sound 2 beeps to
confirm the command.
9.11 CHIME MODE
To program zone 3 and zone 4 as CHIME zones:
Hold down
[9]
for 2 s
[3]
+
[4]
+
[#].
Keypad audible indicator will sound 2 beeps to confirm the
command. Zone 3 and 4 are now CHIME zones.
