BLUGUARD SmartBus P900-TI6N User Manual Download Page 57

Page: 57 / 87

V1.1

SmartBus P900-TI6N USER MANUAL

C
D

[7]

(Press and hold down for 2 seconds)

1. The system will monitor a number of possible trouble conditions. If one of these

conditions occurs, the

icon will display until the trouble is restored.

2. Hold down key

[7]

for 2 seconds.

3. The screen will show Trouble Messages and keypad audible indicator will sound 2 beeps.

The trouble occurred will be displayed. Press the [▼] key to check on all the troubles that

need to be serviced.

5. Press

[#]

key to exit and keypad audible indicator will sound 2 beeps.

6. Possible trouble conditions.



AC Loss



Real Time Clock Loss (Program System Timer - refer to page 74 Section 9.19.7)



Siren Fail



Battery Low Voltage



Telephone Line/GSM CMS Reporting Fail



Telephone Line/GSM Personal Reporting Fail



Telephone Line Connection Fail

Remark: Telephone Line/GSM CMS Reporting Fail, Telephone Line/GSM Personal Reporting Fail and
Telephone Line Connection Fail service icon will be extinguished when they are viewed once.

[8]

(Press and hold down for 2 seconds)

1. The system alarm memory will store the most recent alarm condition. An alarm condition

will cause the

icon flash.

9.9 VIEW SYSTEM TROUBLE

9.10 VIEW ALARM MEMORY

Summary of Contents for SmartBus P900-TI6N
























































































Search results

Summary of Contents for SmartBus P900-TI6N

Reviews:

Related manuals for SmartBus P900-TI6N

Brands by name

Popular brands

BLUGUARD SmartBus P900-TI6N, User Manual

Search results

Summary of Contents for SmartBus P900-TI6N

Reviews:

Related manuals for SmartBus P900-TI6N

Brands by name

Popular brands