56
V1.1
SmartBus P900-TI6N USER MANUAL
L
C
D
5. Repeat step 3 or 4 to bypass other zones.
6. Press
[#]
key to exit the bypass mode and keypad audible indicator will sound 2 beeps to
confirm the command.
7. To bypass all zones at once, press key
[0]
followed by
[#].
8. The relevant
ZONE
underline will slow flash to indicate that the zone is bypassed now.
9. Zones cannot be bypassed once the system is armed.
10. All bypassed zones will be automatically un-bypassed each time the system is disarmed
and must be reapplied before the next arming.
[6]
+ [ZONE NUMBERS] + [#]
(Press and hold down for 2 seconds) (1 to 16)
1. Hold down key
[6]
for 2 seconds.
2. The screen will show the Bypass Zones and keypad audible indicator will sound 2 beeps.
3. Press the zone number corresponding to the current bypassed zone e.g. press
[2]
if you
wish to un-bypass zone 2.
4.
To enter zone number more than 9, press button [F] to represent the ten’s digit.
E.g. To enter zone number 12, press [F] + [2], zone number 16 press [F] + [6]
5. Repeat step 3 or 4 to un-bypass other zones if any.
6. Press
[#]
key to exit the bypass mode and keypad audible indicator will sound 2 beeps to
confirm the command.
7. To un-bypass all zones at once, press key
[0]
followed by
[#].
8. Keypad audible indicator will sound 2 beeps to confirm the command and the system will
be back to normal mode.
9. The relevant
ZONE
indicator will extinguish to indicate that the zone is now active.
9.8 UN-BYPASS ZONE
