33
V1.1
SmartBus P900-TI6N USER MANUAL
L
E
D
9. The
P2
indicator will illuminate if Partition 2 is armed.
10. Any
NIGHT STAY
zones will be automatically bypassed (shown by flashing zone
indicators).
11. There is no
ENTRY
delay in this arming mode. Any violation on the active zones will
trigger the system instantly.
[4] + [1 or 2] + [#]
(Press and hold down for 2 seconds)
1. In this mode, the system will be armed with EXIT delay time which allows certain violated
zones to be bypassed temporary. When the violated zones resume, the zone will be
protected again.
2. Press and hold down key
[4]
for 2 seconds.
3. Zone indicator
[1]
and
[2]
will flash.
4. Press key
[1]
to arm Partition 1 or press key
[2]
to arm Partition 2 followed by
[#]
key.
5. The
P1
indicator will illuminate if Partition 1 is armed.
6. The
P2
indicator will illuminate if Partition 2 is armed.
7. Keypad audible indicator will sound on and off for the duration of the
EXIT
delay. Any
bypassed zones will be shown by the flashing zone indicators.
8. User will be given an
ENTRY
delay time to disarm the system when enter the protected
premises via
ENTRY/EXIT
zone.
[0] + [1 or 2] + [#]
(Press and hold down for 2 seconds)
8.14.6 PARTITION FORCE ARMING
8.14.7 PARTITION HOLIDAY ARMING
