32
V1.1
SmartBus P900-TI6N USER MANUAL
L
E
D
3. Ensure that all zone indicators are distinguished; if not, check that all protected premises
are closed.
4. DO NOT open the
ENTRY/EXIT
zone.
5. Press and hold down key
[2]
for 2 seconds.
6. Zone indicator
[1]
and
[2]
will flash.
7. Press key
[1]
to arm Partition 1 or press key
[2]
to arm Partition 2 followed by
[#]
key.
8. The
P1
indicator will illuminate if Partition 1 is armed.
9. The
P2
indicator will illuminate if Partition 2 is armed.
10. Any
DAY STAY
zones will be automatically bypassed (shown by flashing zone
indicators).
11. User will be given an
ENTRY
delay time to disarm the system when enter the protected
premises via
ENTRY/EXIT
zone.
[3] + [1 or 2] + [#]
(Press and hold down for 2 seconds)
1. This arming mode is ideal for
NIGHT
time arming with user still remains in the protected
premises.
2. In this mode, system will be armed instantly with certain preprogrammed,
NIGHT STAY
zones bypassed automatically.
3. Ensure that all zone indicators are distinguished; if not, check that all protected premises
are closed.
4. DO NOT open the
ENTRY/EXIT
zone.
5. Press and hold down key
[3]
for 2 seconds.
6. Zone indicator
[1]
and
[2]
will flash.
7. Press key
[1]
to arm Partition 1 or press key
[2]
to arm Partition 2 followed by
[#]
key.
8. The
P1
indicator will illuminate if Partition 1 is armed.
8.14.5 PARTITION NIGHT ARMING