31
V1.1
SmartBus P900-TI6N USER MANUAL
L
E
D
9. User will be given an
ENTRY
delay time to disarm the system when enter the protected
premises via
ENTRY/EXIT
zone.
[1] + [1 or 2] + [#]
(Press and hold down for 2 seconds)
1. Ensure that all zone indicators are distinguished; if not, check that all protected premises
are closed.
2. Press and hold down key
[1]
for 2 seconds.
3. Zone indicator
[1]
and
[2]
will flash.
4. Press key
[1]
to arm Partition 1 or press key
[2]
to arm Partition 2 followed by
[#]
key.
5. The
P1
indicator will illuminate if Partition 1 is armed.
6. The
P2
indicator will illuminate if Partition 2 is armed.
7. The keypad audible indicator will sound on and off for the duration of the
EXIT
delay. Any
bypassed zones will be shown by the flashing zone indicators.
8. Leave the premises only via the
EXIT/ENTRY
zone.
9. During AWAY arming, the telephone line will be supervised hourly. If the telephone line is
disconnected, a new trouble condition will be registered (please refer to View System
Trouble at page 24).
10. User will be given an
ENTRY
delay time to disarm the system when enter the protected
premises via
ENTRY/EXIT
zone.
[2] + [1 or 2] + [#]
(Press and hold down for 2 seconds)
1. This arming mode is ideal for
DAY
time arming with user still remains in the protected
premises.
2. In this mode, system will be armed instantly with certain preprogrammed,
DAY STAY
zones bypassed automatically.
8.14.3 FASTKEY AWAY ARMING EITHER 1 PARTITION
8.14.4 PARTITION DAY ARMING