
48
INSTALLATION AND OPERATING INSTRUCTIONS · HSI
EN
GENERAL SAFETY INSTRUCTIONS
AND INSTALLATION NOTES
ѥ
Warning!
Limited number of users
The following persons should use this product only under the supervision of another
responsible person:
• persons with limited physical aptitude
• persons with limited mental aptitude
• persons with limited sensory aptitude .
• children under the age of 12
• Use the device only in accordance with its designated use .
• Store the device out of the reach of children .
• Maintenance and repairs may only be performed by a specialist who is familiar with the
latest guidelines (for ex . VDE- standards) .
ѥ
Warning!
Installation instructions
• The installation of this equipment may only be performed by trained and authorized
personnel and in compliance with all safety regulations and guidelines .
• Especially when used on a boat an incorrect installation can lead to corrosion damage .
Therefore the installation should be performed by trained boat electricians .
ѥ
Warning!
Important mounting instructions!
To reduce the risk of fire, injuries and electronic shocks, please note the following instruc-
tions:
• Do not cover the ventilation slits and ensure adequate ventilation . The installation site of
the inverter has to be well ventilated .
• Install the inverter only on solid mounting surfaces .
• Do not pull the cable .
• Grasp all cables tightly during the mounting and dismantling .
• Always start with connecting the input voltage and switch the inverter on afterwards .
• Do not install near heat sources or in direct sunlight .
• Avoid dust, humidity and flammable or caustic substances near the inverter .
• The inverter heats up during operation, keep away from heat-sensitive materials .
• Do not drop the inverter and avoid shocks .