Hardware User Manual - Argos3D-P220
Last change: 2 August 2018
Version 5
© BECOM BLUETECHNIX 2018
Page 7 | 21
1.2.2
Eye Safety
Illumination: LEDs
Wavelength
850nm (typ)
In accordance with
EN62471:2008 resp.
IEC62471:2006
Output power
TBD
1.3
Safety instructions
Important
This manual is part of the device and contains information and illustrations about the correct
handling of the device and must be read before installation or use. Observe the operating
instructions. Non-observance of the instructions, operation which is not in accordance with use
as prescribed below, wrong installation or handling can affect the safety of people and
machinery.
The installation and connection must comply with the applicable national and international
standards. Responsibility lies with the person installing the unit.
1.4
Electrical connection
Note
The unit must be connected by a qualified electrician.
Device of protection class III (PC III).
The electric supply must only be made via PELV circuits.
The device must only be powered by a limited energy source (
≤
30V;
≤
8A;
≤
100VA).
Disconnect power before connecting the unit.
