Bluetechnix Argos 3D-P320 Software User Manual Download Page 64

Page: 64 / 70

Software User Manual - Argos 3D-P320

Last change: 2 February 2016

Version 0.14

Page 64 | 70

Support

8.1

General Support

General support for products can be found at Bluetechnix’ support site

Support Link



https://support.bluetechnix.at/index.html

8.2

Software Downloads

Camera support packages are available for registered customers only. Please contact Bluetechnix support if
you do not yet have an account.

Software Download Portal



https://support.bluetechnix.at/software/

8.3

Related Products



TIM

µP

-19kS3-Spartan 6



LIM

-LED-850

8.4

Camera Development Package

The camera offers the possibility to bring your own application onto the Argos 3D-P320.

The Argos 3D-P320 is based on an embedded ARM Linux system based on the i.MX6 Quad-core processor
from Freescale Inc.

Please contact Bluetechnix support for more information.

Summary of Contents for Argos 3D-P320







































































Search results

Summary of Contents for Argos 3D-P320

Reviews:

Related manuals for Argos 3D-P320

Brands by name

Popular brands

Bluetechnix Argos 3D-P320, Software User Manual

Search results

Summary of Contents for Argos 3D-P320

Reviews:

Related manuals for Argos 3D-P320

Brands by name

Popular brands