S L - 1 . 2 5 S E A M L O C K E R
8
o
o
CAUTION: Only lay the machine down on surface once the turning parts have come to a complete
stop.
Ø
Depending on the construction of the channel to be locked, the seam locker can be used in 2 different
ways: “Open Channel” and “Beginning Flange.” These 2 methods are outlined below:
o
Open Channel:
§
In open channel operation you essentially have no constraints at the front and back of
the channel
•
1) Bevel the web at the beginning of the channel to approximately 30 degrees
with a length of 5mm. See below:
•
•
2) Move lever in direction of the feed (tool in working position towards the end
of the end of the channel).
