ENGLISH
BlueAnt
15
Pairing Procedure
(This is an example only and may differ from your phone, but the process will be the same.)
1.
First turn the phone OFF and then back ON again to refresh its memory.
2.
Bring the mobile phone to about 30cm from the V1 Device.
3.
Find the Bluetooth menu in your mobile phone. Turn Bluetooth ON. (Check your mobile phone user guide if necessary)
4.
With the V1 OFF, Press and Hold the BAB for about 6 seconds. The LED will appear a solid Blue, and then will start
fl
ashing. The V1 is now in Pairing mode and ready to be found in searches by other Bluetooth devices. Pairing mode will
be active for 2 minutes.
5.
Perform a Bluetooth device discovery on your mobile phone to add a new device. (It takes a few seconds to search for
and
fi
nd other Bluetooth devices around you).
6.
When Bluetooth devices are found, the phone will display “BlueAnt V1”. Scroll to it and press OK to con
fi
rm that you
want to Pair with it.
7.
Enter Passkey “0000” when your phone prompts you. The phone and V1 will now Pair.
8.
An additional security setting in your phone may be needed to allow the headset and phone to connect automatically
without
con
fi
rmation each time you connect your V1. Generally in the options for the BlueAnt V1, it will be referred to as
“set as authorized”, “add to trusted devices”, ‘’allow connection’’ or similar.
9.
If required for
fi
rst time connection, select the BlueAnt V1 to connect with your phone. OR, Click the BAB on the V1,
to connect with the phone.
