8 | www.blueskyoutdoorliving.com
STEP 3
Make sure not to fully tighten bolts
until all four sections of the top ring
are assembled.
Attach one top ring section [C] to
the fire bowl [D] by inserting a
M6 x 15 mm bolt [H] into each
support arm from the outside, then
through the holes in the top edge of
the fire bowl. On the inside of the fire
bowl, secure in place with washers [I]
and nuts [J].
Insert a second top ring section into
the end of the first top ring and attach
to the fire bowl as described above.
Continue attaching top ring sections
until in this manner until you have
formed a completely connected ring.
Make sure the top ring sections are
connected and straight, then securely
tighten all bolts.
C
D
H
I J
