Ver. 1.2, 2015/8/12
1
TurboCycler Quick Operation Guide
Hardware operation
1.
To open the lid, pull the handle upward and lift the lid backward to the upright
position.
2.
To close the lid, press down on the area in front of the handle with force.
3.
Lid heater setting:
PCR vessels
Compression mat*
Lid heater
temperature**
Regular PCR plate,
tube-strips and tubes
Not necessary
105
o
C
Low profile PCR plate,
tube-strips and tubes
Must be used to ensure sufficient contact
pressure from the heated lid
***
120
o
C
*
Standard accessory shipped with TurboCycler.
**
For detailed instructions on the lid heater setting, please refer to the TurboCycler Operation
Manual’s System/Lid section.
