Blue Ox BX1126 Installation Instructions Manual Download Page 1

BX1126

2007-12 Jeep Wrangler

(Includes Sport)

Installation Instructions

1. Blue Ox

®

 

towing products and accessories

 are

 

intended to be installed by Blue Ox

®  

Dealers

 

who are familiar with our products and have the

 

equipment and knowledge to do “

 

it work”.

2. Many Blue Ox

®

 Baseplates are designed to

use existing holes and hardware to mount the
baseplate to the towed vehicle. Even though
bolts are there, do not assume they are adequate
for baseplate mounting. Always use hardware
supplied in the hardware kit or existing hardware

specified in the Baseplate Installation Instructions.

Confirm the towability and pre-towing 

procedures for your vehicle with the 

owner’s manual or contact the vehicle’s 

manufacturer for specific towing 

procedures. 

Please read BOTH these Installation Instructions and the General Towing 

Instructions before attempting to install or operate this equipment.

Bolt Size Grade 5 Grade 8

1/4”

10

14

5/16”

19

29

3/8”

33

47

7/16”

54

78

1/2”

78

119

5/8”

154

230

Bolt Torque Specifications 

Torque in Foot-Pounds for Inch Bolts

 

Bolt Torque Specifications 

Torque in Foot-Pounds for Metric Bolts 

Bolt Size Grade 8.8 Grade 10.9

6MM

6

8

8MM

16

22

10MM

31

40

12MM

54

70

14MM

89

117

Attachment Tab Height: 

14-1/2”

Attachment Tab Width: 

24”

Summary of Contents for BX1126







Reviews: