27
STRONGARM™ ML10 VEHICLE RESTRAINT—OWNER’S MANUAL
ISSUE DATE: SEPTEMBER 29, 2014 REV.0 (PART # 038-538E)
13.0 VEHICLE RESTRAINT TROUBLESHOOTING CONT'D
PROBLEM
PROBLEM CAUSE
Optional communication
lights do not change color
when the selector switch is
moved (Auto system only).
1. Faulty wiring or connections.
2. Faulty selector switch.
3. Proximity switch already active.
Optional communication
lights do not change color
when the restraining arm
is raised to the interlocked
position. Lights remain red
inside and green outside
(Auto system only).
1. Faulty wiring or loose connections.
2. Faulty proximity switch.
3. Sensor is out of adjustment.
4. Selector switch is not set to auto.
Optional communication
lights do not change color
when the restraint arm is
lowered. Lights remain green
inside and red outside.
1. Faulty wiring.
2. Faulty or damaged sensor.
Optional communication
lights system is displaying
wrong signal both indoors
and outside (Automatic
system only).
1. Wrong type of proximity switch used.
2. Improper installation of sensor.
Do not attempt to install, make repairs or adjustments. Only a trained and authorized service technician should perform the
installation process. Contact your local dealer or distributor for assistance.
WARNING
