XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
X
OPERAT
E
DO NOT
AIRBAG DOCK LEVELER WITH CONTROLS—OWNER’S MANUAL
8
ISSUE DATE: FEBRUARY 1, 2016 REV.2 (PART # 038-880E)
Approved way to lockout / tagout.
WARNING
Always lockout and tagout any power source before performing any
work on any electrical devices or electrical controls according to
OSHA regulations and approved local electrical codes.
4.0 LOCKOUT / TAGOUT PROCEDURE AND RULES
In accordance with the rules and regulations of the Occupational
Safety and Health Administration (OSHA), all affected employees
must be notified that the machine or equipment will be shut down
and locked out to perform repair or maintenance work. The work
area must be checked to ensure that all personnel have been
removed or safely repositioned. The machine or equipment power
supply shall be locked in the OFF position or disconnected from
the energy source. Blue Giant strongly recommends that only
OSHA-approved lockout devices and procedures be utilized.
The energy isolating device must bear a prominent warning tag
indicating that work is being done on the equipment and the
name of the authorized employee responsible for the lockout. It is
mandatory that tagout notices not be susceptible to deterioration
or illegibility due to weather conditions or exposure to chemicals
and moisture.
