20
CASTING ASSEMBLY
FIG.6A
DANGER
DANGER: DO NOT PASS HOSE ABOVE SHIELD HOSE MUST NOT
TOUCH ANY PART OF THE BASE
WARNING:
ENSURE HOSE ASSEMBLY DOES NOT CONTACT THE
CASTING, OR ANY OTHER PARTS WHICH WILL GET HOT.
!
IMPORTANT
!
WARNING
!
REGARDING IMPROPER ASSEMBLY OF HOSE
ON PROPANE AND NATURAL GAS FG/FGQ/FGF500 MODELS
DURING THE ASSEMBLY PROCESS OF THE BASE ASSEMBLY STEP, THE CUSTOMER NEEDS TO
ENSURE THAT THE HOSE IS UNTIED FROM BURNER BEFORE FINAL ASSEMBLY. CUSTOMER
SHOULD RELEASE THE TIE AND PASS THE HOSE THROUGH THE GAP BETWEEN HEAT SHIELD
AND FRONT PANEL BEFORE ASSEMBLING THE FIREBOX (BASE) TO THE CART (CABINET).
NATURAL GAS (NG) HOSE MUST PASS THROUGH THE GAP AND THAT IS DIRECTED TO THE
BOTTOM OF CABINET. PROPANE HOSE/REGULATOR SHOULD ALSO DIRECTED THROUGH THE
GAP TO THE CYLINDER UNDERNEATH THE HEAT SHIELD.
WARNING
FAILURE TO ENSURE ANY OF THESE WARNINGS MAY RESULT IN
HAZARDOUS FIRE OR EXPLOSION CAUSING SERIOUS BODILY INJURY
AND/OR PROPERTY DAMAGE AND INVALIDATES WARRANTY
!
IF HOSE IS TIED TO
BURNER OR BASE,
FIRST REMOVE THE TIE
AND PACKAGING AND
THEN ASSEMBLE THE
GRILL TO BASE AS
SHOWN
Your barbeque will come equipped with one or the other, a propane hose
with regulator, or Natural Gas hose with adaptor as shown. Hose type
depends on model purchased.
Note:
This barbeque is not dual fuel, the gas type and hose assembly
depends on the model purchased.
PROPANE
HOSE WITH
REGULATOR
NATURAL
GAS (NG)
HOSE WITH
ADAPTOR
• Remove and discard packaging from hose & base
Propane Model Shown
Natural Gas Model Shown
