background image

Introduction

Owner Information

Thank  you  for  your  decision  to  purchase  a  Blue

 

Diamond

 

Mini  V  Blade

To  ensure

 

maximum 

performance  of  your  equipment,  it  is

 

mandatory 

that  you  thoroughly  study  the

 

Operator’s

 

Manual 

and 

follow 

the

 

recommendations. 

Proper 

operation 

and

 

maintenance  are  essential  to  maximize  equipment

 

life and prevent personal injury.

Operate  and  maintain  this  equipment  in  a  safe

 

manner and in accordance with all applicable

 

local, 

state,  and  federal  codes,  regulations  and  /or  laws. 
Follow all on-product labeling and

 

instructions.

Make  sure  that  all  personnel  have  read  this

 

Operator’s Manual and thoroughly understand

 

safe 

and correct operating, installation and

 

maintenance 

procedures.

Blue Diamond is continually working to improve its

 

products. Blue Diamond reserves the right to

 

make 

any improvements or changes as deemed

 

practical 

and possible without incurring any

 

responsibility or 

obligation  to  make  any  changes

 

or  additions  to 

equipment sold previously.

Although  great  care  has  been  taken  to  ensure  the

 

accuracy  of  this  publication,  Blue  Diamond  makes

 

no  warranty  or  guarantee  of  any  kind,  written  or

 

expressed,  implied  or  otherwise  with  regard  to  the

 

information  contained  within  this  manual.  Blue

 

Diamond  assumes  no  responsibility  for  any  errors

 

that  may  appear  in  this  manual  and  shall  not  be

 

liable  under  any  circumstances  for  incidental,

 

consequential  or  punitive  damages  in  connection

 

with, or arising from the use of this manual.

Keep  this  manual  available  for  frequent  reference.

 

All  new  operators  or  owners  must  review  the

 

manual  before  using  the  equipment  and  annually

 

thereafter. 

Contact 

your 

Blue 

Diamond

 

Attachments  Dealer  for  assistance,  information,  or

 

additional  copies  of  the  manual.  Contact

 

www.bluediamondattachments.com 

or 

call 

888-376-7027  for  a  complete  list  of  dealers  in
your

 

area.

Serial Number Location

Please record attachment information in the space
provided for future reference.

The  serial  number  plate  (is

 

located  on  right 

side,  just  forward  of  the

 

attachment mounting 

plate.

Always  use  your  serial  number  when  requesting

 

information or when ordering parts.

NOTE: 

The directions left, right, front and rear, as

mentioned throughout this manual, are as

 

viewed from the operator’s position.

Model Number:

Serial Number:

Dealer Name:

Dealer Number:

Date of Purchase:

Blue Diamond®Attachments

2

Summary of Contents for 122305-48













Reviews: