Blue Coat SG810 series, Installation Manual

Page: 85 / 110

P/N 231-02941 SG810 Installation Guide page 85
Appendix B: Regulatory Statements
Any modification to this product, unless expressly approved by Blue Coat
Systems, Inc., could void the user’s authority to operate the equipment.
Do not service the proxy yourself. If you have any questions, please
contact Blue Coat.
Blue Coat Corporate
420 North Mary Avenue
Sunnyvale, CA 94085-4121 \
408.220.2200
General System Cautions
To ensure normal operation, follow these guidelines:
Top cover removal —Before removing the top cover, turn off the power.
Ventilation guidelines —Be Careful! Do not block any openings in the system to
avoid overheating the system.
Water caution —Be Careful! Do not get any water on the system.
System use and installation —The system is intended for use in a server room
only. It is not intended be installed in individual employee work areas.
Rack-Mounting Notes
Read these notes before rack-mounting the SG810 .
A Elevated Operating Ambient—If installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack environment may be
greater than room ambient. Therefore, consideration should be given to
installing the equipment in an environment compatible with the maximum
ambient temperature (Tmax) specified by the manufacturer.
B Reduced Air Flow—Installation of the equipment in a rack should be such
that the amount of air flow required for safe operation of the equipment is not
compromised.