Blue Coat SG510 Series Installation Manual Download Page 94

Page: 94 / 110

P/N 231-02833

Blue Coat SG510 Installation Guide

page 94

Declaration of Conformity

Declaration of Conformity

We, Blue Coat Systems

420 North Mary Avenue

Sunnyvale, CA 94085

Declare under our sole responsibility that the products

Blue Coat Systems Model 510 Series

to which this declaration relates is in conformity with the following

standards:

EN 60950: 1999-2004

EN 55022: 1994
EN 50024: 1998

Following the provisions of the 73/23/EEC and 89/336/EEC Directives,

including the Amending Directive 93/68/EEC.

Blue Coat Systems Model 510 Series is also in conformity with the following

standard:

Directive 2002/95/EC, Restriction of Hazardous Substances (RoHS).

Sunnyvale, CA 94085
Date: July 1, 2006

420 North Mary Avenue

Tim Redjaian

Sunnyvale, CA 94085-4121

Director of Engineering

USA
866.30.BCOAT Tool Free
408.220.2200 Direct
408.220.2250 Fax
www.bluecoat.com

Summary of Contents for SG510 Series















































































































Search results

Summary of Contents for SG510 Series

Reviews:

Related manuals for SG510 Series

Brands by name

Popular brands

Blue Coat SG510 Series, Installation Manual

Search results

Summary of Contents for SG510 Series

Reviews:

Related manuals for SG510 Series

Brands by name

Popular brands