Blue Coat SG510 Series, Installation Manual

Page: 87 / 110

P/N 231-02833 Blue Coat SG510 Installation Guide page 87
Appendix B:Regulatory Statements
Any modification to this product, unless expressly approved by Blue Coat
Systems, Inc., could void the user’s authority to operate the equipment.
Do not service the proxy yourself. If you have any questions, please
contact Blue Coat.
Blue Coat Corporate
420 North Mary Avenue
Sunnyvale, CA 94085-4121
408.220.2200
General System Cautions
To ensure normal operation, follow these guidelines:
Top cover removal —Before removing the top cover, turn off the power.
Ventilation guidelines —Be Careful! Do not block any openings in the system to
avoid overheating the system.
Water caution —Be Careful! Do not get any water on the system.
System use and installation —The system is intended for use in a server room
only. It is not intended be installed in individual employee work areas.
Power Cord Cautions
Caution—This product is designed to work with power systems having a
grounded neutral. To reduce the risk of electric shock, do not plug this product
into any other type of power system. Contact a qualified electrician if you are not
sure what type of power is supplied to your building.
Caution—Not all power cords have the same current ratings. Do not use the
power cord provided with your equipment for any other products or use.
Caution—there is no power switch equipped on this device. The power cord
serves as the primary disconnect device for the system. Be sure to plug the power
cord into a grounded power outlet that is nearby the system and is readily