Blue Coat SG510 Series, Installation Manual

Page: 21 / 110

P/N 231-02833 Blue Coat SG510 Installation Guide page 21
Section A: Configuring the SG510 with the Front Panel
Features
You can configure a SG510 the first time you power it on using the front panel
LCD and control buttons.
Figure 2-1: Front Panel LCD and Control Buttons
Use the LCD and the buttons to monitor the system and to set the basic
networking parameters.
LCD Behavior
The default behavior of the front-panel LCD is to turn off after 30 seconds. The
front-panel LCD behavior is configurable; see
“Configuring the Front-Panel LCD
Behavior” on page 68 for information.
To Turn the Front-Panel LCD Back On:
• If the SG510 is powered on, but the front-panel LCD is off, press any
front-panel control button (see Figure 2-1) to turn the LCD back on.
After the LCD illuminates, the front-panel control buttons return to their
normal behavior.
Menu
button
LCD
Enter
button
Arrow buttons