Blue Coat PacketShaper PS12000 Series, Maintenance And Upgrade Manual

Page: 46 / 50

46 PacketShaper 12000 Series Maintenance Guide
PS12000 Front Bezel
5. Peel off the serial number sticker from the old bezel and attach it to the new bezel.
Note: If you are unable to peel and reattach the serial number label, use the smaller blank
label included with the kit to manually record the hardware serial number and attach it to
the bezel.
Find and attach the hardware model identification sticker in the recess located at the
lower right hand corner of the bezel. The sticker is included in the plastic bag that ships
with the bezel.
6. Reattach the bracket and the retaining clip.
a. Replace the bracket. The bracket should line up against the bezel.
b. Secure the bracket with the retaining clip that you removed in Step 3 above. Make
sure to align the pin on the retaining clip with the corresponding slot on the bracket.
c. Tighten the thumbscrew on the retaining clip.
1
2
SYSTEM HDD
1
2
SYSTEM HDD
a
c
b