Blue Bird Vision 2021, Driver'S Handbook Manual

Page: 76 / 210

3-12
D R I V E R S H A N D B O O K
Air Brake PSI
Selecting this menu item will display the screen shown in the right
margin that is used to perform Pre-trip Brake Inspections. This shows
the Front and Rear brake system PSI. Pressing the bottom button will
exit to the previous screen.
Selftest
Selecting menu item Selftest in the Settings and Diagnostic menu
will display the instrument selftest menu. Menu items include Gaug-
es, Telltales, LCD,Digital Inputs, Analog Inputs and Software Version.
Gauge Test. When Gauges is selected, Gauge Test will be displayed
and will indicate the gauge to be tested. The selected gauge will be
driven through three positions from “Zero Scale” to “Mid Scale” to “Full
Scale” pausing at each position indicated in the Gauge Test. This test
will proceed through all the gauges and return to the menu. Pressing
the middle and top buttons will change the selected gauge. Gauges
may include Frt Air, Motor Temperature, Speed, State of Charge (SOC)
and Rear Air. Pressing the lower button will end the test and return
to the previous menu
Rear Air: 120 PSI
Air Brake PSI
Front Air: 120 PSI
Settings
Diagnostics
Air PSI Check
Selftest
Analog Inputs
CL-12 Rear Air Pressure
CL-13 Applied Front Air Pressure
CL-14 Applied Rear Air Pressure
CL-15 Ammeter
87
330
Ω
9
Digital Inputs
CL-18 Ignition
CL-19 Headlight
CL-20 High Beam
CL-21 Left Turn
Active
Active
Inactive
Gauge Test
MOTOR TEMPERATURE
Zero Scale
Gauges
Telltales
LCD
Digital Inputs
Telltale Test
ABS
On
Software Version
SW Version: 00.01
Config Number: BLBIRD1
Serial: 7002001A
Spec: