Blue Bird Vision 2021, Driver'S Handbook Manual

Page: 56 / 210

2-44
D R I V E R S H A N D B O O K
Sleeping Child Check Monitor
Your bus may be equipped with a Sleeping Child Check system. This feature uses a Sleeping Child Check Monitor that once activated requires
the operator to walk to the rear of the bus and press a deactivation switch on the rear wall to prevent an alarm from occurring. The purpose
is to require the operator to check the bus for pupils that may be sleeping, hiding or remaining after each route has ended.
Depending on which feature your bus is equipped with, the alarm can be armed in one of several ways. Turning on the ignition and/or
warning lights and/or entrance door will arm the system. If the alarm is activated the headlights and horn and/or red warning lights will be
activated and begin to flash and the horn will sound on and off repetitively. If the alarm is activated the operator should close the entrance
door and push the deactivation switch in the back of the bus. This system will disarm itself automatically after 10 minutes.
Back-Up Camera
When the bus is shifted into reverse, a display for the back-up
camera will be activated and appear in the LH side of the in-
terior rearview mirror giving the driver a view behind the bus.
See additional information on this system in Section 6.
Exterior Compartments
Hood Compartment
The hood of the
VISION
is mounted on a torsion spring hinge mechanism just above the front bumper, and is retained in its closed position
by two spring latches, one on each side of the hood near the body’s front cowl. The system is designed for very easy unassisted one-person
opening / closing, and unobstructed access to regular service components.
Back-Up Camera display shown activated