Blue Bird Vision 2021, Driver'S Handbook Manual

Page: 182 / 210

10-14
D R I V E R S H A N D B O O K
Mirrors
Exterior Crossview:
A Rosco Eye-Max LP crossview mirror system allows a seated driver to view pedestrians while the bus is stopped. The
crossview mirror is asymmetric shaped, LH & RH, with tunnel tube mount supported by a center mounting post. The mirror mounting
posts are attached to the hood. The crossview mirror system allows for viewing all areas along the front and sides of the bus which are
not visible by direct view.
Exterior Rearview: Rosco Open View Split System rearview mirror. Provides view of the roadway to the rear, as well as a view of the
ground along both right and left sides. Rearview mirror system is comprised of two independent mirror assemblies with one flat mirror
glass measuring 7.38” x 10.00” and one convex mirror glass measuring 7.38” x 5.00” on each side of the bus. Right rearview mirrors are
located so as to be visible through the wiped area of the windshield. Left rearview mirrors are located so as to be viewed through the
Driver’s window. Rosco Accustyle mirrors are optional.
Interior Rearview: 6” x 30” with 3/16” clear safety glass laminated to steel backing plate. 1 3/4” radius rounded corners. Perimeter of mir-
ror edged with 5/8 diameter rubber padding. Interior rearview mirror is installed above the seated Driver on the front upper inner panel,
and provides a clear view of the vehicle interior and roadway to the rear.
Paint
Exterior:
Heat cured polyurethane. National school bus yellow with yellow rub rails. Black rubrails (optional) and black bumpers.
Interior: Astro White, hot sprayed-on baked enamel, except aluminized inner side panels. Seat frames, heaters and trim are black. Switch
console and dash dark gray.
Rust Proofing: Body parts thoroughly rust-proofed after fabrication and before assembly.
Undercoat: Underside of body floor, skirt and wheelhousings thoroughly undercoated prior to body mount on chassis to ensure best
coverage and maximum corrosion resistance.