Blue Bird M380 2003, Owner'S Manual

Page: 38 / 579

1-1 - Safety and Security - Security Features____________________________________________M380 Owner’s Manual
1-2-6 Rev. “F”
To activate the Stop and Go feature:
1. With engine running push transmitter button 4 (on FM 2-way press button 2).
•
The parking lights will turn on.
2. Remove the key from the ignition.
3. Exit the motor home and lock the doors manually or using transmitter button 1.
To resume driver control:
1. Unlock the doors manually or by pressing transmitter button 2.
2. Turn on the ignition.
•
The motor home resumes driver control.
1-2.3.25 Safety Features
The system will not start the motor home if the brake pedal is pressed. Also, if the brake pedal is
pressed while remote running, the remote start will shut down.
1-2.3.26 Replacing Lost or Stolen Remote Transmitters
This system can “learn” a maximum of 4 remote transmitters. To add a transmitter or replace
lost/stolen transmitters, please consult with an authorized dealer.
1-2.3.27 Entering Programming
To enter System Programming:
1. Turn on ignition.
2. Within 5 seconds, press valet switch 5 times.
•
The siren will chirp 3 times, indicating that you have entered Programming.
3. Press the valet switch the number times equal to the Feature you want to change.
•
The siren will chirp each time the valet switch is pressed.
4. Within 5 seconds, press the transmitter button corresponding to the desired operating mode for
that Feature.
•
The siren will chirp to indicate the setting.
One chirp = Button 1
Two chirps = Button 2
Three chirps = Button 3
5. Repeat steps 3 and 4 to change additional features.
6. Turn off ignition to save changes.
NOTE: The optional FM transmitter may not be used for feature programming.
STATUS INDICATOR (LED) FUNCTIONS PARKING LIGHTS FUNCTIONS
On Solid = Valet Mode On Solid = Coach Remote Starting
Slow Flash = System Armed Flash 1x = System armed
Rapid Flash = Passive Arming Flash 2x = System disarmed
TAMPER ALERT LED FUNCTIONS Flash 3x = Tamper indication (after disarming)
1 flash = sensor #2 Flash 4x = Defective zone warning
2 flashes = shock sensor (after arming)
4 flashes = door
5 flashes = bay door
flash-flash-pause-flash-pause = shock sensor
SYSTEM REFERENCE INDICATORS