Bludee AC800 User Manual Download Page 5

   

                                                                                                                                                          AC800  V2.00 

 

3/16 

 

General safety guide 

 

 

This equipment must only be operated by qualified technicians

 

Read the instruction manual carefully before operating this equipment. If there is anything you do not fully 
understand, please contact your distributor or manufacturer. We like to help. 

 

The  refrigerant  storage  cylinder  contains  liquid  refrigerant  under  high  pressure.  Overfilling  of  the  storage 
cylinder may cause violent explosion. Do not disable the overfill safety protection of this machine. Always 
keep the cylinder on the load cell platform whenever the machine is operating. 

 

Only use cylinder which is supplied with this equipment or recommended by the manufacturer. 

 

Always use this machine in a well-ventilated area, avoid inhaling refrigerant and/or oil vapors, always read 
material safety instructions of refrigerant and oil packaging, for related warning and care. 

 

Always switch off the machine and disconnect the power cable before removing any covers or servicing this 
machine, to avoid electric shock which can be fatal. 

 

Never use compressed air to test for leaks on the vehicle or this equipment!

 

 

Wear  safety  goggles  and  gloves  to  protect  eyes  and  skin  from  contact  with  refrigerant.  Liquid  refrigerant 
when  it  comes  in  contact  with  the  human  skin  or  eyes  will  cause  frostbite  and/or  blindness.  If  accidental 
contact  is made  with  eyes  or  skin,  wash  the  affected  area  with  plenty  of  water  immediately  and  contact  a 
doctor if required. 

 

Avoid using the machine in very hot or flammable areas. 

 

Store the machine in a well ventilated cool area when not in use. 

 

Avoid using extension power cable thinner than 1.5mm

(10amp current carrying capacity). 

 

Keep gasoline or other flammable substances away from the equipment. 

 

For  the  1234yf  machine,  once  a  leak  is  detected  in  the  unit,  switch  off  the  equipment  by 
pressing the Emergency stop button and contact your distributor or service dealer. 

 
 

 

 
 
 
 
 
 
 
 
 
 

Summary of Contents for AC800



















Reviews: