- 9 -
Table 4. Recommended Suction and Discharge Pipe.
UNIT
MAIN PIPE
TANK FITTING
ISO VALVE
CIP VALVE
UNIT INLET
BALL CHECK VALVE
25 BLOOM
2"
2"
2"
1"
2"
2"
50 BLOOM
2"
2"
2"
1"
2"
2"
150 BLOOM
3"
3"
3"
1 - 1/2"
2"
3"
Piping connections for all sizes of BLOOM are provided below. Verify the type of pump provided
with your BLOOM before beginning installation. These materials are not included with a
purchase of a BLOOM, but can be found at most hardware stores.
Frame Dimensions and Components Descriptions.
Figure 5 shows the overall BLOOM frame dimensions and the location of the suction and
discharge ports of the pump in metric and imperial units.
Figure 8 shows the major components of the BLOOM.
Figure 7. BLOOM with suction and discharge connection locations
Figure 5. BLOOM with suction and discharge connection locations
