24
AQT8 Series
User Manual
Figure 7.2 - “2:1 Multiplexing” > “TS Config” Tab - Full View
7.2 TS Config
The “TS Config” tab (Figure 7.2) allows the user to change the TS Bitrate, TSID, VCT, Short Name, Program Number, Major
Channel and Minor Channel as well as additional advanced configurations of the Program PID Base and the Next Program
PID Base. In addition, the Programs Relative PID Map has additional Global configurations that can be set or left as is.
The user controls in this section are set up in a similar way to those described in Section 6, from Section 6.5 (“TS Config >
Basic Configuration”) to Section 6.8 (“TS Config > Global Programs Relative PID Map”).
