BLODGETT OVEN COMPANY
www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05401 Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
MODEL MARK V
SHORT FORM SPECIFICATIONS
Provide Blodgett full-size convection oven model MARK V, (single/double) compartment. Each compartment shall have (porcelainized/stainless) steel liner and shall accept five 18" x
26" standard full-size bake pans. Doors shall (be solid stainless steel/ have dual pane thermal glass windows) with single porcelain handle and simultaneous operation. Unit shall be
electrically heated with three tubular heaters. Air in baking chamber distributed by single inlet blower wheel powered by a two-speed, 1/3 HP motor with thermal overload protection.
Each chamber shall be fitted with four commercial lamps and five chrome-plated removable racks. Control panel shall be recessed with Cook/Cool Down mode selector, solid state
(manual/digital) thermostat (200 - 500° F), (93-260°C) and 60-minute timer. Provide options and accessories as indicated.
DIMENSIONS:
Floor space
38-1/4" (972mm) W x 36-7/8" (937mm) D
Product clearance
1/2" (12mm) from combustible and non-combustible construction
Interior
29" (737mm) W x 20" (508mm) H x 24-1/4" (616mm) D
If oven is on casters add to all height dimensions:
Single
4" (114mm)
Double
2" (57mm)
POWER SUPPLY:
V.A.C.
Hz
Phase
K.W.H.
Amperes (L1-L2-L3)
DOMESTIC
208
60
1
11
51/0/51
208
60 3
11
31/29/29
220/240
60
1
11
44/0/44
220/240
60
3
11
26/24/24
440
60
3
11
15/14/14
480
60 3
11
14/13/13
1/3 H.P., 2 speed motor, 1140 and 1725 RPM (60Hz.)
INTERNATIONAL
220/240 50
1
11
48/0/48
240/415
50
3
11
18/14/14
230/400
50
3
11
18/15/15
MAXIMUM INPUT:
Single
11KW
Double
22KW (11KW each section)
MINIMUM ENTRY CLEARANCE:
Uncrated
28-7/8" (733mm)
Crated
34-1/16" (876mm)
SHIPPING INFORMATION:
Approx. Weight:
Single
540 lbs. (245 kg)
Double
1020 lbs. (463 kg)
Crate sizes:
37-1/2" (952mm) x 43-1/2" (1105mm) x 51-3/4" (1315mm)
(2 crates required for double)
Printed in U.S.A.
NOTE:
FOR COMMERCIAL USE ONLY
NOTE:
The company reserves the right to make substitutions of components without prior notice.
P/N 35021 Rev M (6/07)
APPROVAL/STAMP